KCO-Fiver-MTP-MPO-QSFP-Banner-page-1

FTTA Solution

FTTA product:

- Fiber Optic Cable (ADSS Cable, ASU Cable, FTTH Cale, Field Fiber Cable, etc).

- CPRI Fiber Optic Pach Cord, FullAxs Cable, ODVA Cable, Nokia NSN cable, etc.

- Outdoor Fiber Optic Pigtail.

- Water-proof Fast Connector.

- Outdoor Multi-function Fiber Optic Box.

- Optical Fiber PLC Splitter.

- Outdoor Fiber Optic Distribution Box.

- Outdoor Fiber Optic Splice Enclosure Box.

- Fiber Optic Components.

- SFP, QSFP. 

- DAC,  AOC.

微信图片_20260626171851_475_113
Compatible Nokia NSN DLC 5.0mm Field Fiber Optic Patch Cord

Compatible Nokia NSN DLC 5.0mm Field Fiber Optic Patch Cord

• 100% compatibel with Nokia NSN waterproof fiber optic connector for FTTA Telecom tower.

• Standard duplex LC uni-boot connector.

• Available Single mode and Multimode.

• IP65 protection, salt-mist proof, humidity proof.

• Broad temperature range and wide range of indoor and outdoor Patch cables.

• Easy Operation, reliable and cost-effective Installation.

• The connector of side A is DLC, and side-B can be LC,FC,SC.

• Used for 3G 4G 5G base station BBU, RRU, RRH, LTE.

SM 12fibers Span 100m Aerial Outdoor Dielectric ADSS Fiber Optical Cable

SM 12fibers Span 100m Aerial Outdoor Dielectric ADSS Fiber Optical Cable

ADSS fiber optic cable is available in single out-sheath and double out-sheath for different options. 

• ADSS fiber optic cable span can do: 80m, 100m, 200m, 300m, 500m or customized.

ADSS fiber optic cable can be installed without shutting off the power.

• Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back-props.

• The design life span is 30 years.

• Good performance of tensile strength and temperature for outdoor using. 

 

Single Mode G652D G657A1 GYTS 12 Core Pipeline Outdoor Fiber Optic Cable

Single Mode G652D G657A1 GYTS 12 Core Pipeline Outdoor Fiber Optic Cable

+ Use for outdoor such as pipeline, under ground, duct or direct burial

+ Fiber count: 2 fibers, 4 fibers, 6 fibers,  8 fibers, 12 fibers, 24 fibers

+ Fiber type:

SM: G652D, SM G657A1, SM G657A2, G655

MM: OM1, OM2,  OM3,  OM4,  OM5

+ Cable out-sheath: PE, black

+ Cable diameter: 7.0mm ( 6.5mm, 8.0mm optional)

+ Cable printing and labelling: accept.

SM Single Mode G652D GYTA 24fibers Direct Burial Outdoor Fibre Optical Cable

SM Single Mode G652D GYTA 24fibers Direct Burial Outdoor Fibre Optical Cable

+ Use for outdoor such as pipeline, under ground, duct or direct burial 

+ Fiber count: 24 fibers, 48fibers, 96 fibers, 144 fibers, 288 fibers

+ Fiber type:

SM:G652D, SM G657A1, SM G657A2, G655

MM: OM1, OM2,  OM3,  OM4,  OM5

+ Cable out-sheath: PE, black

+ Cable diameter: 8.5mm, 9.0mm, 10.5mm

+ Cable printing and labelling: accept.

Single Mode Central Loose Tube GYXTW Aerial Outdoor Optical Fiber Cable

Single Mode Central Loose Tube GYXTW Aerial Outdoor Optical Fiber Cable

+ Use for outdoor aerial. 

+ Central Loose Tube Outdoor Fiber Optic Cable,

+ Fiber count: 2 fibers, 4 fibers, 6 fibers, 8 fibers, 12 fibers,  24 fibers.

+ Fiber type: SM G652D, SM G657A1, SM G657A2, MM OM1, MM OM2, MM OM3, MM OM4, MM OM5

+ Cable out-sheath: PE, black

+ Cable diameter: 6.5mm, 7.0mm, 7.0mm

+ Cable printing and labelling: accept.

Outdoor Fiber Optical FTTH Drop Cable GJYXFCH

Outdoor Fiber Optical FTTH Drop Cable GJYXFCH

- Fiber Optical FTTH Drop Cable, the outer skin is generally black or white, the diameter is relatively small, and the flexibility is good.

- The Outdoor Fiber Optical FTTH Drop Cable is large used in FTTH (Fiber to the home).

- The cross section is 8-shaped, the reinforcing member is located at the center of the two circles, and the metal or non-metal structure can be used, and the optical fiber is located at the geometric center of the 8-shaped shape.
- The optic fiber inside the cable is mostly G657A2 or G657A1 small bending radius fiber, which can be laid at a bending radius of 20mm.
- It is suitable for entering the house by pipe or distribution openly.

- The unique 8-shaped structure of the drop cable can realize the field end in the shortest time.

Distribution Fanout Tight Buffer Indoor Fiber Optical Cable (GJFJV)

Distribution Fanout Tight Buffer Indoor Fiber Optical Cable (GJFJV)

Distribution Fanout Tight Buffer Indoor Fiber Optical Cable (GJFJV) is used in fiber optical pigtails and fiber optical patch cords.
It used as interconnect lines of equipments,and used in optical connections in optical  communication rooms and optical distribution frames.
It is large used in indoor cabling, especially used as distribution cable.
Good mechanical and environmental characteristics.
 Flame retardant characteristics meet the requirements of relevant standards.
 The mechanical characteristics of jacked meet the requirements of relevant standards.
The fanout indoor fiber optic cable is soft, flexible, easy to lay and splice and with big capacity data transmission.
• Meet various requirements of market and clients.

Rodent Resistant Indoor SC-SC Duplex Armored Fiber Optic Patch Cord

Rodent Resistant Indoor SC-SC Duplex Armored Fiber Optic Patch Cord

  • Armored fiber optic patch cable with SUS304 spiral armored tube.
  • It is crush and rodent resistant.
  • LC, SC, FC, ST, E2000, DIN, D4, MU, MPO, MTP, … connnector for different options.
  • Can use for indoor and outdoor anti-rat bite environment
  • Low insertion loss.
  • Low return loss.
  • Various connector types available.
  • Easy installation.
  • Environmentally stable.
IP67 Waterproof OptiTap Compatible H Connector SC APC FTTH Drop Cable Patch Cord

IP67 Waterproof OptiTap Compatible H Connector SC APC FTTH Drop Cable Patch Cord

100% compatible with Corning H OptiTap waterproof connector.
Low IL and high RL.
Mostly use for FTTH and FTTA application.
Cost effective solution for in house termination.
• Low insertion loss and added loss.
• Waterproof grade: IP67.
• The material in the jumpel cable are all-weather and UV-resistant.
• RoHS materials compliant.
• Cable diameter Range: 2.0*3.0mm, 2.0*5.0mm, 3.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm or customized.

Compatible Huawei Mini SC APC Outdoor FTTA 5.0mm Fiber Optic Patch Cable

Compatible Huawei Mini SC APC Outdoor FTTA 5.0mm Fiber Optic Patch Cable

• 100% compatible with Huawei Mini SC water-proof fiber optic connector.

• Low IL and high RL.

• Compact size, easy to operate, durable.

• Easy connection to hardened adapters on terminals or closures.

• Reduce welding, connect directly to achieve interconnection.

• Spiral clamping mechanism ensures long-term reliable connection.

• Guide mechanism, can be blinded with one hand, simple and quick for connection and installation.

• Seal design: It is waterproof, dust-proof, anti-corrosion. Match IP67 grade: water and dust protection.

ODC Female And ODC Male Connector Joint Equipment Fiber Optical Patch Cord For FTTA Fiber To The Antenna

ODC Female And ODC Male Connector Joint Equipment Fiber Optical Patch Cord For FTTA Fiber To The Antenna

  • Bird proof and rodent resistant IP67 water and dust protection
  • Available with singlemode or multimode fiber Flange, Jam-Nut, or In-Line type receptacle assemblies
  • Operating temperature: -40° to 85°C
  • RoHS compliant.
Military Tactical YZC Outdoor Fiber Optic Patch Cable

Military Tactical YZC Outdoor Fiber Optic Patch Cable

• IP67 rated to ensure protection from dust and water immersion.

• Temperature range: -40°C to +85°C.

• Bayonet-style mechanical lock.

• Flame retardant materials per UL 94 V-0.

• Core number available: 2fo, 4fo, 6fo, 8fo, 12fo.

12345 Next > >> Page 1 / 5

What is FTTA Solution?

- FTTA (Fiber to the Antenna) is a cellular telecommunication network architecture that runs fiber optic cables directly up cell towers to connect baseband units at the ground with remote radio heads (RRHs) near the antennas. It replaces traditional, heavy copper coaxial cables to drastically reduce signal loss, increase bandwidth, and support 4G and 5G speeds.

- A standard FTTA deployment physically separates processing and radio units to optimize signal integrity and reduce tower load:

+ Baseband Unit (BBU): Located at the base of the tower in a protected cabinet. It processes digital data and handles baseband functions.

+ Remote Radio Head (RRH / RRU): Mounted high up the tower, directly adjacent to the antennas. It converts the digital signals from the BBU into the analog radio frequency (RF) signals transmitted to mobile devices.

+ CPRI Fiber Optic Cable Link: The Common Public Radio Interface (CPRI) standard protocol dictates how the BBU and RRH communicate over fiber.

+ Hybrid Cables: Instead of running separate fiber for data and copper for power, FTTA commonly uses armored hybrid cables that bundle both in a single weather-resistant jacket, saving significant space and weight.

+ Distribution Box: Installed at the top of the tower, this box splits the hybrid trunk cable, routing the fiber to the RRHs and connecting the DC power supply.

Process