FTTA Solution

• LC to LC Multimode OM3 OM4 Quad Optical Fiber Adapter.
• Connector type: LC Stanard
  
• Type: same SC Duplex Type
• Fiber type: Multimode MM OM3 OM4
  
• Fiber count: quad, 4fo, 4 fibers
  
• Color: Aqua
  
• Dusty cap type: high cap
  
• Logo print: acceptable.
• Packing lable print: acceptable.

• High compatibility: Can be assembled ODVA, Hconn, Mini SC, AARC, PTLC, PTMPO or power adaptor.

• Factory sealed or field assembly.

• Strong enough: working under 1200N pulling force long term.

• From 2 to 12 ports for single or multi-fiber harsh connector.

• Available with PLC or splice sleeve for fiber divide.

• IP67 waterproof rating.

• Wall-mounting, aerial installation or holding pole installation.

• Decreased angle surface and height make sure no connector interfering when operating.

• Meet IEC 61753-1 standard.

• Cost effective: save 40% operating time.

• Insertion loss: SC/LC≤0.3dB, MPT/MPO≤0.5dB, Return loss: ≥50dB.

• Tensile strength: ≥50 N.

• Working pressure: 70kpa~106kpa;

• It is intended for suspension of flexible subscriber cables FTTH with optical fiber.

• It consists of a round (heart-shaped) body and an open bow-duck that can be securely clamped into the clamping body.

• The clamp is made of PA66 nylon.

• Used as an anchorage of a flexible cable on the end support (on poles, buildings). When using two clamps, suspension is carried out on intermediate supports. 

• The unique patented design allows the anchoring of the cable on the end support without any radial pressure on the cable and fiber and provides additional protection for the FTTH cable.

Optical fiber polishing machine is a polishing device specially used for polishing optical fiber connectors, which is widely used in the optical fiber industry.

• 2.5mm universal connector

• Operates either in CW or Pulsed

• Constant output power

• Lower Battery warning

• Long battery life

• Crash-proof and dust-proof design for laser head

• Laser case ground design prevents ESD damage

• Portable and rugged, easy to use

• Used for Single Fiber Cleaving

• Utilizes an Automatic Anvil Drop for Fewer Required Steps and Better Cleave Consistency

• Prevents Double Scoring of the Fibers

• Has Superior Blade Height and Rotational Adjustment

• Available With Automatic Fiber Scrap Collection

• Can Be Operated With Minimal Step

• Suitable with connector type: LC/UPC
• Number of fibers: Duplex
• Transmission type: Single-mode
• Color: Blue
• LC/UPC to LC/UPC Simplex Single Mode Fiber Optic Adapter with Flange.
• The LC/UPC fiber optic adapters are suitable for Fiber Optics Patch Panel Adapters, which means you can use them in any type of enclosure with rectangular cutouts.
• This LC/UPC to LC/UPC Fiber Optic Adapters are lightweight due to their plastic bodies.

• LC to LC UPC Single mode Duplex Fiber Optic Adapter.
• Connector type: LC/UPC.
• Fiber type: Single mode G652D, G657A, G657B.
• Fiber count: duplex, 2fo.
• Color: Blue.
• Dusty cap type: high cap.
• Logo print: acceptable.
• Packing lable print: acceptable.

• LC to LC APC Single mode Duplex Fiber Optic Adapter.
• Connector type: LC/APC.
• Fiber type: Single mode G652D, G657A, G657B.
• Fiber count: quad, 4fo, 4 fibers
  
• Color: Green
  
• Dusty cap type: high cap $ Auto Shutter Cap
  
• Logo print: acceptable.
• Packing lable print: acceptable.