SM 12fibers Span 100m Aerial Outdoor Dielectric ADSS Fiber Optical Cable
ADSS Cable Description:
• The Outdoor ADSS fiber optic cable is loose tube stranded. 250um fiber, is positioned into a loose tube which made of high modulus plastics.
• The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound.
• It is covered with thin PE inner sheath.
• After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
• The ADSS outdoor fiber optic cable can be installed without shutting off the power: Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV.
• Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back-props.
• Large span lengths (80m, 100m, 150m, 200m, 300m, 500m) and the largest span is over 1000m.
• Good performance of tensile strength and temperature.
ADSS Cable Characteristics:
+ All-Dielectric Construction: ADSS fiber optic cables are made entirely of non-conductive materials, making them safe for installation near energized power lines and eliminating the need for grounding.
+ Self-Supporting: They are designed to support their own weight and the forces of wind and ice, negating the need for a separate messenger wire.
+ High Tensile Strength: ADSS cables utilize materials like aramid fiber yarns to achieve high tensile strength, allowing them to withstand various environmental stresses.
+ Environmental Resistance: They are designed to resist UV radiation, temperature fluctuations, and moisture, making them suitable for diverse climates.
+ Long Span Capabilities: ADSS cables can span considerable distances between support structures (poles or towers), reducing the number of supports needed.
ADSS Cable Application:
+ The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed.
+ For overhead power lines under 110kV, PE outer sheath is applied.
+ For power lines equal to or over 110kV, AT outer sheath is applied.
+ The dedicate design of aramid quantity and stranding process can satisfy the demand on 100m and 200m of spans.
ADSS Double Out-sheath Cable Structure:









