Multimode OM4 24fo 24fibers 24cores MTP-LC MPO-LC Fanout Harness Patch Cable
What is a MPO to LC fant-out patch cord?
+ MPO to LC OM4 24-fibers (24fo) fan-out patch cables, often called harness cables, are designed to connect high-density MPO backbone trunks or transceivers (like 40G/100G QSFP+) to standard 10G LC ports.
+ MPO to LC OM4 24-fiber (24fo) patch cord is a high-density solution used to transition a single MPO-24 connector into 12 duplex LC pairs.
+ This configuration is primarily used for aggregating multiple 10G/25G links or breaking out high-bandwidth parallel optics like 100G SR10 or 400G SR8 transceivers.
+ These cables often are installed in the MPO MTP high density module for patch panel.
+ Fiber Type: OM4 laser-optimized 50/125μm multimode fiber, which supports 100G Ethernet up to 100 meters.
+ Single Connector (1x24): One 24-fiber MPO MTP connector on one end fanning out to 24 LC connector.
+ Dual Connector (2x12): Often found in high-density cassettes or specialized harnesses, where two 12-fiber MPO MTP connectors on the rear transition to 24 LC connector on the front.
+ Polarity: Most 24-fiber breakouts utilize Type B (Reversed) polarity for direct equipment-to-equipment links, while Type A (Straight) is commonly used in cassette-based structured cabling and Type C are optional.
+ Jacket: Options include LSZH (Low Smoke Zero Halogen) for safety or OFNP (Plenum) for use in air handling spaces
+ Cable diameter: 0.9mm
+ Cable Length: 30cm (0.3m)
Applications
+ 40G/100G to 10G/25G Migration for Data Center and AI Center.
+ Direct Device-to-Switch Connectivity.
+ Backbone-to-Device Routing.
+ High-Density Patching.
Feature:
+ 100% factory tested before shipment.
+ Ultra low lost, high return loss.
+ MT based Multi-fiber Connector, 8fibers, 12fibers and 24fibers connector terminations and assemblies.
+ Economical solution for mass-termination of fiber.
+ Ruggedized round cable, oval cable and bare ribbon options available.
+ Color coded housings available to differentiate fiber type, polish type and/or connector grade.
+ Good in repeatability and exchangeability.
+ Pre-install in the high density MPO MTP module cassette.
+ Quick delivery time: 1-2 days for quantity 1000pcs.
Specifications
|
Type |
Single Mode |
Single Mode |
Multi Mode |
|||
|
|
(APC Polish) |
(UPC Polish) |
(PC Polish) |
|||
|
Fiber Count |
8,12,24 etc. |
8,12,24 etc. |
8,12,24 etc. |
|||
|
Fiber Type |
G652D,G657A1 etc. |
G652D,G657A1 etc. |
OM1,OM2,OM3, OM4, etc. |
|||
|
Max. Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
|
|
Low Loss |
|
Low Loss |
|
Low Loss |
|
|
|
≤0.35 dB |
≤0.75dB |
≤0.35 dB |
≤0.75dB |
≤0.35 dB |
≤0.60dB |
|
Return Loss |
≥60 dB |
≥60 dB |
NA |
|||
|
Durability |
≥500 times |
≥500 times |
≥500 times |
|||
|
Operating Temperature |
-40℃~+80℃ |
-40℃~+80℃ |
-40℃~+80℃ |
|||
|
Test Wavelength |
1310nm |
1310nm |
1310nm |
|||
|
Insert-pull test |
1000 times＜0.5 dB |
|||||
|
Interchange |
＜0.5 dB |
|||||
|
Anti-tensile force |
15kgf |
|||||
