KCO-QDD-400G-LR4-S 400GBASE-LR4 QSFP-DD PAM4 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module
- Compliant to QSFP-DD MSA
- 4 CWDM lanes MUX/DEMUX design
- Duplex LC connector
- Up to 10km transmission on single mode fiber (SMF) with FEC
- 8×53.125Gb/s electrical interface (400GAUI- 8)
- Data Rate 106.25Gbps (PAM4) per channel
- Case temperature range: 0 ~ +70℃
- Maximum power consumption 9W
- RoHS complaint
400GBASE-SR4.2 QSFP-DD PAM4 850nm 100m DOM MPO-12/UPC MMF Optical Transceiver Module, Breakout to 4 x 100G-SR1.2
- QSFP-DD MSA
- 8x 53.125Gb/s Electrical Interface(400GAUI-8) Compliant
- Up to 150m OM5 MMF transmission
- MPO-12 Optical Connector
- RoHS Compliant
- Single 3.3 V Power Supply
- Maximum Power Consumption 12W
- Operating Case Temperature: 0°C to 70°C
800GBASE 2xSR4/SR8 OSFP Finned Top PAM4 850nm 50m DOM Dual MPO-12/APC MMF Optical Transceiver Module
- Cisco OSFP-800G-VR8 Compatible
- NVIDIA/Mellanox MMA4Z00-NS Compatible
- Arista Networks OSFP-800G-2VSR4 Compatible
- Juniper Networks OSFP-2X400G-VR4-P Compatible
- H3C OSFP-800G-VR8-MM850-DMPO Compatible
- Others
800GBASE 2xDR4/DR8 OSFP Finned Top PAM4 1310nm 500m DOM Dual MPO-12/APC SMF Fiber Optical Transceiver Module
NVIDIA/Mellanox MMS4X00-NM Compatible
The Cisco OSFP-800G-DR8 Compatible
Juniper Networks OSFP-2X400G-DR4-P Compatible
H3C OSFP800-800G-DR8-SM1310-DMPO Compatible
10Gb/s SFP+ Active Optical Cable
- The KCO-SFP-10G-AOC-xM Compatible SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors and operate over Multi-Mode Fiber (MMF).
- This KCO-SFP-10G-AOC-xM AOC is compliant with SFF-8431 MSA standards.
- It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 10Gbps connections within racks and across adjacent racks.
- The optics are completely contained inside the cable, which—without LC optical connectors to clean, scratch, or break—dramatically increases reliability and lowers maintenance costs.
- AOCs are most often used for creating 1-30m short switch-to-switch or switch-to-GPU links.
40Gb/s QSFP+ TO QSFP+ Active Optical Cable
-Support 40GBASE-SR4/QDR application
- Compliant to QSFP+ Electrical MSA SFF-8436
- Multi rate of up to 10.3125Gbps
- +3.3V single power supply
- Low power consumption
- Operating case temp: Commercial: 0°C to +70 °C
- RoHS compliant
100Gb/s SFP28 Active Optical Cable
- Support 100GBASE-SR4/EDR application
- Compliant to QSFP28 Electrical MSA SFF-8636
- Multi rate of up to 25.78125Gbps
- +3.3V single power supply
- Low power consumption
- Operating case temp Commercial: 0°C to +70 °C
- RoHS compliant
400Gb/s QSFP-DD to 2x200G QSFP56 AOC Active Optical Cable MMF
The KCO-QDD-400-AOC-xM active optical cables are designed for use in 400 Gigabit Ethernet links over OM4 multimode fibers, and contain eight multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 53Gb/s.
This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.
Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks.
It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.
200G QSFP-DD Active Optical Cable OM3
The KCO-200G-QSFP-DD-xM active optical cable is designed for use in 200 Gigabit Ethernet links over OM3 multimode fiber.
This KCO-200G-QSFP-DD-xM active optical cable is compliant with QSFP-DD MSA V5.0 and CMIS V4.0.
It provides a connection of a 200G QSFP-DD port to another QSFP-DD ports and is suitable for quick and simple connections within racks and across adjacent racks.