KCO QSFP+ 40G ER4 40Gb/s QSFP+ SMF 1310 40km Transceiver
4 CWDM lanes Mux/Demux design
Up to 11.1Gbps Data rate per wavelength
Up to 40km transmission on SMF with FEC.
Electrically hot-pluggable
Digital Diagnostics Monitoring Interface
Compliant with QSFP+ MSA with LC connector
Case operating temperature range:0°C to 70°C
Power dissipation < 3.5 W
KCO QSFP+ 40G LR4 LC 40Gb/s QSFP+ LR4 SMF 10km LC Transceiver
What is QSFP+ 40G LR4
A 40G QSFP+ LR4 is a hot-pluggable optical transceiver module for 40 Gigabit Ethernet (40GbE) that uses single-mode fiber to transmit data up to 10 kilometers. It operates by combining four separate 10G channels onto two strands of single-mode fiber using CWDM technology, which is then separated back into four 10G channels on the receiving end. This module is known for its high-density connectivity, small form factor.
KCO QSFP+ 40G PLR4 SMF 1310 10km MPO 40GBASE PSM4 LR PLR4 QSFP+ SMF 1310nm 10km MTP/MPO Connector Optical Transceiver Module
* Compliant with QSFP MSA
* Single +3.3V power supply
* Commercial operating temperature: 0oCto +70oC
* MPO/MTP connector
* RoHS Compliant
KCO QSFP+ 40G SR4 40Gb/s QSFP+ MMF 100M MPO Connector Transceiver with DDM
High Channel Capacity: 40 Gbps per module
Up to 11.1Gbps Data rate per channel
Maximum link length of 100m links on OM3 multimode fiber Or 150m links on OM4 multimode fiber
High Reliability 850nm VCSEL technology
Electrically hot-pluggable
Digital diagnostic SFF-8436 compliant
Case operating temperature range:0°C to 70°C
Power dissipation < 0.7 W
KCO QSFP28 100G ER4 ER4L-S SMF 1310nm 40km WDM LC 100Gb/s QSFP28 ER4 SMF 1310nm WDM DLC Optical Transceiver
+ KCO QSFP28 100G ER4 fiber optical transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers.
+ The laser drivers control 4- EML with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm.
KCO QSFP28 100G LR4 SMF 1310 10km DOM LC 100Gb/s QSFP28 Single mode fiber LR4 Transceiver
KCO QSFP28 100G LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers.
The laser drivers control 4- Distributed Feedback Laser (DFB) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector.
100G QSFP28 PSM4 SMF 1310nm 2KM MTP MPO Fiber Optic Transceiver
- P/N: KCO-QSFP28-100G-PSM4
- Up to 26Gbps per channel bandwidth;
- Compliant with QSFP28 MSA
- 4 channels 1310nm DFP
- 4 channels PIN photo detector array
- Up to 2km reach over standard single mode fiber
- MTP MPO connector compatible
- Hot pluggable electrical interface
- Single +3.3V power supply operating
- Commercial Temperature range 0°C to 70°C
- Compliant to IEEE 802.3ba for 100GBASE-PSM4 links
- RoHS Compliant Part
KCO QSFP28 100G ZR4 SMF 1310nm 80km WDM LC Fiber Optic Transceiver
KCO QSFP28 100G ZR4 is designed for 80km optical communication applications.
This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter- face.
The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.
Cisco Compatible 100GBASE-SR SWDM4 QSFP28 BiDi 850/880/910/940nm 100m DOM Duplex LC/UPC MMF Optical Transceiver Module
KCO QSFP28 100G SRBD MMF 100M LC Duplex DOM
Cisco Compatible 100GBASE-SR SWDM4 QSFP28 Bi-Directional Optical Transceiver Module for Ethernet and Data Center (MMF, 850/880/910/940nm, 100m, LC, DOM)
