LC Multimode Fiber Optic Connector Housing for Fiber Optic Patch Cord and Pigtail

Short Description:

• Un-assembly LC fiber optic housing set;

• Widely use to produce the LC fiber optic patch cord and pigtail;

• Low insertion loss;

• High return loss;

• Ease of installation;

• Low cost;

• Reliability;

• Low environmental sensitivity;

• Ease of use;

• Meet ROHS standard.

Send email to us

Product Detail

Product Tags

Performance Index:

Item	SM(Single Mode)			MM(Multimode)
Fiber Cable Type	G652/G655/G657			OM1	OM2/OM3/OM4/OM5
Fiber Diameter (um)	9/125			62.5/125	50/125
Cable OD (mm)	0.9/1.6/1.8/2.0/2.4/3.0
Endface Type	PC	UPC	APC	UPC	UPC
Typical Insertion Loss (dB)	<0.2	<0.15	<0.2	<0.1	<0.1
Return Loss (dB)	>45	>50	>60	/
Insert-pull Test (dB)	<0.2		<0.3	<0.15
Interchangeability (dB)	<0.1		<0.15	<0.1
Anti-tensile Force (N)	>70
Temperature Range (℃)	-40~+80

Description:

• The fiber-optic patch cord is a fiber-optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunicationequipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

• The fiber optic patch cord is constructed from a core with a high refractive index, surrounded by a coating with a low refractive index, that is strengthened by aramid yarns and surrounded by a protective jacket. Transparency of the core permits transmission of optic signals with little loss over great distances. The coating's low refractive index reflects light back into the core, minimizing signal loss. The protective aramid yarns and outer jacket minimizes physical damage to the core and coating.

• The optical fiber patch cords are used in outdoor or indoor for connection to CATV, FTTH, FTTA, Fiber optic telecommunication networks, PON & GPON networks and fiber optic testing.