-
40Gb/s QSFP+ TO QSFP+ Active Optical Cable
-Support 40GBASE-SR4/QDR application
- Compliant to QSFP+ Electrical MSA SFF-8436
- Multi rate of up to 10.3125Gbps
- +3.3V single power supply
- Low power consumption
- Operating case temp: Commercial: 0°C to +70 °C
- RoHS compliant
-
100Gb/s SFP28 Active Optical Cable
- Support 100GBASE-SR4/EDR application
- Compliant to QSFP28 Electrical MSA SFF-8636
- Multi rate of up to 25.78125Gbps
- +3.3V single power supply
- Low power consumption
- Operating case temp Commercial: 0°C to +70 °C
- RoHS compliant
-
400Gb/s QSFP-DD to 2x200G QSFP56 AOC Active Optical Cable MMF
The KCO-QDD-400-AOC-xM active optical cables are designed for use in 400 Gigabit Ethernet links over OM4 multimode fibers, and contain eight multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 53Gb/s.
This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.
Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks.
It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.
-
200G QSFP-DD Active Optical Cable OM3
The KCO-200G-QSFP-DD-xM active optical cable is designed for use in 200 Gigabit Ethernet links over OM3 multimode fiber.
This KCO-200G-QSFP-DD-xM active optical cable is compliant with QSFP-DD MSA V5.0 and CMIS V4.0.
It provides a connection of a 200G QSFP-DD port to another QSFP-DD ports and is suitable for quick and simple connections within racks and across adjacent racks.
-
Cisco QSFP-4 x 10G-AOC1M Compatible 40G QSFP+ to 4 x 10G SFP+ Active Optical Breakout Cable
- The KCO-40QSFP-4SFP10-AOC-xM Cisco QSFP-4X10G-AOC1M Compatible 40G QSFP+ to 4 SFP+ Breakout Active Optical Cable operates over Multi-Mode Fiber (MMF).
- This breakout cable is compliant with SFF-8436, SFF-8431 and SFP+ & QSFP MSA standards.
- It provides a connection of a 40G QSFP+ port on one end and to four 10G SFP+ ports on the other end and is suitable for quick and simple connections within racks and across adjacent racks.
-
Cisco Compatible 1G SFP Passive Direct Attach Copper Twinax Cable SFP to SFP 30AWG
- The KCO-1G-DAC-xM 1G SFP Passive Direct Attach Copper Twinax Cable is designed for use in 1GBASE Ethernet.
- This KCO-1G-DAC-xM DAC cable is compliant with SFF-8472, SFF-8024, and SFP+ MSA.
- With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers.
-
SFP-H10GB-CU1M Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable
- Max. Power Consumption 0.1W
- Switches Tested for Prime Performance, Quality, Reliability
- Minimum Bend Radius 23mm for Flexible Routing
- Simplified Patching and Cost-effective Short Links Solution
-
Cisco SFP-H25G-CU1M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable
- Supports up to 25.78 Gbps for efficient data transmission
- Silver-plated copper conductor for enhanced signal quality
- Compliant with multiple standards including IEEE P802.3by and SFF-8402
- Designed with a durable PVC jacket and a 30 mm bending radius for enhanced flexibility
- Low Bit Error Rate (BER) 1E-15 ensures reliable connectivity
-
Cisco QSFP-H40G-CU1M Compatible 40G QSFP+ Passive Direct Attach Copper Cable
- Fully compatible with IEEE802.3ba and Infiniband QDR specifications
- 40 Gb/s total bandwidth
- 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbpsdata rates
- Single 3.3V power supply.
- Low power consumption <1.5W
- 30 AWG to 24 AWG cable sizes available
- RoHS, QSFP MSA compliant
- Compliant InfiniBand Trade Association (IBTA), 40Gigabit Ethernet (40G BASE – CR4)
- Application for Data Center Networking, Networked storage systems, Switches, and Routers
-
Cisco QSFP-100G-CU1M Compatible 100G QSFP28 Passive Direct Attach Copper Twinax Cable
- QSFP28 conforms to the Small Form Factor SFF-8665
- 4-Channel Full-Duplex Passive Copper Cable Transceiver
- Support for multi-gigabit data rates :25.78Gb/s (per channel)
- Maximum aggregate data rate: 100Gb/s (4 x 25.78Gb/s)
- Copper link length up to 3m (passive limiting)
- High-Density QSFP 38-PIN Connector
- Power Supply: +3.3V
- Low power consumption: 0.02 W (typ.)
- Temperature Range: 0~ 70 °C
- ROHS Compliant -
Cisco QSFP-4SFP25G-CU1M Compatible 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable
- Compliant with SFF-8665
- Up to 28.3125Gbps data rate per channel
- Up to 5m transmission
- Single 3.3V power supply
- RoHS compliant
-
Single mode 12 Cores MPO MTP Optical Fiber Loopback
UPC or APC polish is avalable.
Push-Pull MPO design.
Available in a wide variety of wiring configurations and fiber types.
RoHS compliant.
Customized attenuation available.
8, 12, 24 fibers optional is available.
Available with or without Pull tabs.
Compact and portable.
great for troubleshooting fiber links/interfaces and ensuring that the lines aren’t broken.
It is convenient, compact and easy to test the QSFP+ Transceiver.
