-
12fo 24fo MPO MTP Fiber Optic Modular Cassette
MPO Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO backbones with LC or SC patching. Modular system allows for rapid deployment of high-density data center infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. can be mounted in 1U or 4U 19” multi-slot chassis. MPO Cassettes contain factory controlled and tested MPO-LC fan-outs to deliver optical performance and reliability. Low loss MPO Elite and LC or SC Premium versions are offered featuring low insertion loss for demanding power budget high speed networks.
-
MTP MPO fiber optic connector one-click cleaner pen
- Easy one-handed operation
- 800+ cleaning times per unit
- Clean ferrules with or without guide pins
- Narrow design reaches tightly spaced MPO adapters
- Inter-mate ability with MPO MTP connector
-
Female to Male Single Mode Elite MPO Fiber Optical Attenuator 1dB to 30dB
Standard IL and Elite IL are available
Pluggable
Low Back Reflection
Accurate Attenuation
Compatible with current conventional Singlemode fiber
High performance
Broadband coverageEnvironmentally stable
RoHS compliant
100% factory tested
-
Single mode 12 Cores MPO MTP Optical Fiber Loopback
UPC or APC polish is avalable
Push-Pull MPO design
Available in a wide variety of wiring configurations and fiber types
RoHS compliant
Customized attenuation available
8, 12, 24 fibers optional is available
Available with or without Pull tabs
Compact and portable
great for troubleshooting fiber links/interfaces and ensuring that the lines aren’t broken
It is convenient, compact and easy to test the QSFP+ Transceiver
-
MTP MPO Polishing Jig
MT/PC polishing fixture is used MT/APC ferrule high density polishing. provides effective solutions to three critical issues during fiber optic connectors polishing with traditional method: (1) low polishing efficiency. (2) long operation time with fixing ferrules. Without increase in labor cost and equipment cost, one piece of MT/APC could make your polishing efficiency increase several times.
-
KCO-PM-MPO-06 MPO MTP polishing machine for MPO MTP connector
- Programmable system with memory for procedures.
- Dual MT UPC & Angled PC connector polishing;
- High volume polishing, more than 24 ferrules per cycle.
- Accommodates FC/UPC, SC/UPC, ST/UPC, LC/UPC, MU/UPC, FC/APC, MTRJ, E2000connectors.
- Excellent end-face quality. -
KCO-GLC-EX-SMD 1000BASE-EX SFP 1310nm 40km DOM Duplex LC SMF Fiber Optic Transceiver Module
- Up to 1.25Gb/s Data Links
- Hot-Pluggable
- 1310nm DFB laser transmitter
- Duplex LC connector
- Up to 40 km on 9/125μm SMF
- Single +3.3V Power Supply
- Low power dissipation <1W typically
- Commercial operating temperature range: 0°C to 70°C
- RoHS compliant
- Compliant with SFF-8472
-
1.25Gb/s 1310nm Single-mode SFP Transceiver
Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of four sections: the LD driver, the limiting amplifier, the FP laser and the PIN photo-detector. The module data link up to 20km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.
-
1.25Gb/s 850nm Multi-mode SFP Transceiver
The KCO-SFP-MM-1.25-550-01 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).
The transceiver consists of four sections: the LD driver, the limiting amplifier, the VCSEL laser and the PIN photo-detector. The module data link up to 550m in 50/125um multimode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.
-
KCO SFP GE T 1000M 1.25G RJ45 Copper Connector 100m Optical Transceiver Module
KCO SFP GE T 1000M 1.25G RJ45 Copper Connector 30m Optical Transceiver Module
is compatible for Cisco GLC-T / GLC-TE/SFP-GE-T, Mikrotik S-RJ01
The KCO SFP GE T is a Cisco SFP-GE-T compatible copper transceiver module that has been designed, programmed and tested to work with Cisco brand switches and routers. It delivers dependable 1GbE (1000 Mbps) connectivity over copper cable, for 1000BASE-T compliant networks, with a maximum distance of up to 100 m.
-
KCO-SFP+-10G-ER 10Gb/s 1550nm SFP+ 40kmTransceiver
KCO SFP+ 10G ER is a standard for 10 Gigabit Ethernet over fiber optic cables, specifically designed for long-distance transmission.
It allows for data transfer up to 40 km over single-mode fiber (SMF) at a wavelength of 1550nm.
KCO SFP+ 10G ER fiber optic modules, often implemented as SFP+ transceivers, are used in various applications where extended reach is needed, such as connecting buildings on a large campus or within a metropolitan area network.
-
10Gb/s SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB/PIN, Single mode, 10km
KCO-SFP+-10G-LR is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s, inter-converting the 10Gb/s serial electrical data stream with the 10Gb/s optical signal.
