-
Mux Demux 4 Channel Coarse Wavelength Division Multiplexing CWDM LGX box type LC/UPC Connector
• Channel number: 4CH, 8CH, 16CH, maximum 18CH.
• Low Insertion Loss.
• High Isolation.
• Low PDL.
• Compact Design.
• Good channel-to-channel uniformity.
-
1*16 1×16 1:16 LGX box type PLC fiber optical splitter
• Low insertion loss.
• Low Polarization Dependent Loss.
• Excellent Environmental Stability.
• Excellent Mechanical Stability.
• Telcordia GR-1221 and GR-1209.
-
Fiber Optical Distribution Chassis Frame for LGX Type PLC Splitter
• High strength cold rolled steel tape material,
• Fit for 19” rack,
• Suitable for LGX box type Splitter,
• 3U, 4U high design
-
19inch 100GHz C21-C60 LC/UPC Dual Fiber Rack Mountable Type 40 Channel Mux Demux Fiber Optic Dense wavelength-division multiplexing DWDM
• 100GHz/ 200GHz ITU Channel Spacing
• Low Insertion Loss
• Wide Pass Band
• High Channel Isolation
• Excellent Thermal Stability and Reliability
• Epoxy Free Optical Path
-
1 port SC simplex adapter fiber optic terminal box face plate socket
• It is applicable for FTTH, FTTO and FTTD, etc.
• The clasp design of the cover has greatly reduced the installation strength.
• It is very thin and matches with other A86 panels in homes, and also meet the open or concealed cabling for optical cables.
• Coordinating with FC strip-type optical adapter,
• It generates more options in term of fiber interfaces for users, SC, FC is available.
• The big-diametered wrapping post in the box protects radically in an omnibearing way.
• Suitable for SC simplex adapters, FC long type adapter or LC duplex adapter installation.
• Used in the working area routing sub-systems.
• Embedded face box, convenient installation.
• With dust-free device, prevent the dust into.
-
FDB-08A Outdoor Fiber Optic Distribution Box FDB-08A
• Water-proof design with IP-65 Protection level.
• Integrated with splice cassette and cable management rods.
• Manage fibers in a reasonable fiber radius condition.
• Easy to maintain and extend the capacity.
• Fiber bend radius control more than 40mm.
• Suitable for the fusion splice or mechanical splice.
• 1*8 and 1*16 Splitter can be installed as an option.
• Efficient cable management.
• 8/16 ports cable entrance for drop cable.
-
19” drawer type 96 cores fiber optic rack mountable patch panel
• Reliable fastening, Stripping and earthling devices for optic fiber.
• Suitable for LC, SC, FC, ST and E2000, … adapter.
• Fit for 19” rack.
• Accessories make fiber avoid damaging.
• Slide out design, easy to access the back and splicer.
• High-quality steel, beautiful appearance.
• Maximum capacity: 96 fibers.
• All material meet ROHS compliant.
-
Optical Fiber Distribution Frame
• This frame is made of high quality steel, has solid structure and pleasing appearance.
• Fully-closed structure with the advantages of good performance of dust-proof, pleasing and neat appearance.
• Enough space for fiber distribution and storage space and very easy for installation and operations.
• Fully front side operation, convenient for maintenances.
• Curvature radius of 40mm.
• This frame is suitable for both common bundle cables and ribbon type cables.
• Reliable cable fixture cover and earth protection device provided.
• Integrated splice and distribution rotating type patch panel is adopted. Maximum can do 144 SC adapter port.
-
Fiber optic cross connection cabinet
•The SMC box with glass fiber reinforced unsaturated polyester molding compound at high temperature curing.
• This product is suitable for optical fiber access networks, backbone nodes with an excuse for cable wiring devices, optical fiber fusion can be achieved terminal, storage, and scheduling functions, but also for wiring and electrical control boxes for fiber optic local area network, regional network and optical fiber access network.
-
Horizontal Type 12fo 24fo 48fo 72fo 96fo Fiber Optic Splice Closure Box FOSC-H0920
• Great corrosion resistance.
• Suitable for any harsh environment.
• Anti-lighting.
• Great water-proof function.
-
FOSC-V13-48ZG Mini Size Vertical Fiber Optic Splice Closure Box
• High quality PPR material optional, can ensure harsh conditions such as vibration, impact, tensile cable distortion and strong temperature changes.
• Solid structure, perfect outline, thunder, erosion and adding resistance.
• Strong and reasonable structure with mechanical sealing structure, can be opened after sealing and cab be reused.
• Well water and dust proof, unique grounding device to ensure the sealing performance, convenient for installation.
• The splice closure has a wide application range, with good sealing performance, easy installation, produced with high strength engineering plastic housing, with anti-aging, corrosion resistance, high temperature and high mechanical strength and so on.
-
Aerial Type Fiber Optic Splitter Splice Closure Fosc-gjs22
The product is made of high-quality impact resistant plastic and has a standard user interface that can be turned on repeatedly.
Outdoor application and good UV resistant, impact resistant and waterproof.
It can be loaded with 2pcs 1×8 LGX Splitter or 2pcs steel tube micro PLC Splitter.
Unique flip splice tray, flip angle more than 180 degrees, the splicing area and the distribution cable area is more distinct, reducing the cables crossing.
Numerous application such mid-span, branch and direct splice
3 layer structure and easy to maintain.It is suitable for the application on NAP in the distributed split PON architecture.
Protection Level: IP67.
Excellent sealing performance. It is compatible with different optical cables.
