-
10Gb/s SFP+ Active Optical Cable
- The KCO-SFP-10G-AOC-xM Compatible SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors and operate over Multi-Mode Fiber (MMF).
- This KCO-SFP-10G-AOC-xM AOC is compliant with SFF-8431 MSA standards.
- It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 10Gbps connections within racks and across adjacent racks.
- The optics are completely contained inside the cable, which—without LC optical connectors to clean, scratch, or break—dramatically increases reliability and lowers maintenance costs.
- AOCs are most often used for creating 1-30m short switch-to-switch or switch-to-GPU links.
-
40Gb/s QSFP+ TO QSFP+ Active Optical Cable
-Support 40GBASE-SR4/QDR application
- Compliant to QSFP+ Electrical MSA SFF-8436
- Multi rate of up to 10.3125Gbps
- +3.3V single power supply
- Low power consumption
- Operating case temp: Commercial: 0°C to +70 °C
- RoHS compliant
-
100Gb/s SFP28 Active Optical Cable
- Support 100GBASE-SR4/EDR application
- Compliant to QSFP28 Electrical MSA SFF-8636
- Multi rate of up to 25.78125Gbps
- +3.3V single power supply
- Low power consumption
- Operating case temp Commercial: 0°C to +70 °C
- RoHS compliant
-
400Gb/s QSFP-DD to 2x200G QSFP56 AOC Active Optical Cable MMF
The KCO-QDD-400-AOC-xM active optical cables are designed for use in 400 Gigabit Ethernet links over OM4 multimode fibers, and contain eight multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 53Gb/s.
This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.
Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks.
It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.
-
200G QSFP-DD Active Optical Cable OM3
The KCO-200G-QSFP-DD-xM active optical cable is designed for use in 200 Gigabit Ethernet links over OM3 multimode fiber.
This KCO-200G-QSFP-DD-xM active optical cable is compliant with QSFP-DD MSA V5.0 and CMIS V4.0.
It provides a connection of a 200G QSFP-DD port to another QSFP-DD ports and is suitable for quick and simple connections within racks and across adjacent racks.
-
Cisco QSFP-4 x 10G-AOC1M Compatible 40G QSFP+ to 4 x 10G SFP+ Active Optical Breakout Cable
- The KCO-40QSFP-4SFP10-AOC-xM Cisco QSFP-4X10G-AOC1M Compatible 40G QSFP+ to 4 SFP+ Breakout Active Optical Cable operates over Multi-Mode Fiber (MMF).
- This breakout cable is compliant with SFF-8436, SFF-8431 and SFP+ & QSFP MSA standards.
- It provides a connection of a 40G QSFP+ port on one end and to four 10G SFP+ ports on the other end and is suitable for quick and simple connections within racks and across adjacent racks.
-
Cisco Compatible 1G SFP Passive Direct Attach Copper Twinax Cable SFP to SFP 30AWG
- The KCO-1G-DAC-xM 1G SFP Passive Direct Attach Copper Twinax Cable is designed for use in 1GBASE Ethernet.
- This KCO-1G-DAC-xM DAC cable is compliant with SFF-8472, SFF-8024, and SFP+ MSA.
- With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers.
-
SFP-H10GB-CU1M Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable
- Max. Power Consumption 0.1W
- Switches Tested for Prime Performance, Quality, Reliability
- Minimum Bend Radius 23mm for Flexible Routing
- Simplified Patching and Cost-effective Short Links Solution
-
Cisco SFP-H25G-CU1M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable
- Supports up to 25.78 Gbps for efficient data transmission
- Silver-plated copper conductor for enhanced signal quality
- Compliant with multiple standards including IEEE P802.3by and SFF-8402
- Designed with a durable PVC jacket and a 30 mm bending radius for enhanced flexibility
- Low Bit Error Rate (BER) 1E-15 ensures reliable connectivity
-
Cisco QSFP-H40G-CU1M Compatible 40G QSFP+ Passive Direct Attach Copper Cable
- Fully compatible with IEEE802.3ba and Infiniband QDR specifications
- 40 Gb/s total bandwidth
- 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbpsdata rates
- Single 3.3V power supply.
- Low power consumption <1.5W
- 30 AWG to 24 AWG cable sizes available
- RoHS, QSFP MSA compliant
- Compliant InfiniBand Trade Association (IBTA), 40Gigabit Ethernet (40G BASE – CR4)
- Application for Data Center Networking, Networked storage systems, Switches, and Routers
-
Cisco QSFP-100G-CU1M Compatible 100G QSFP28 Passive Direct Attach Copper Twinax Cable
- QSFP28 conforms to the Small Form Factor SFF-8665
- 4-Channel Full-Duplex Passive Copper Cable Transceiver
- Support for multi-gigabit data rates :25.78Gb/s (per channel)
- Maximum aggregate data rate: 100Gb/s (4 x 25.78Gb/s)
- Copper link length up to 3m (passive limiting)
- High-Density QSFP 38-PIN Connector
- Power Supply: +3.3V
- Low power consumption: 0.02 W (typ.)
- Temperature Range: 0~ 70 °C
- ROHS Compliant -
Cisco QSFP-4SFP25G-CU1M Compatible 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable
- Compliant with SFF-8665
- Up to 28.3125Gbps data rate per channel
- Up to 5m transmission
- Single 3.3V power supply
- RoHS compliant
