8 16 port c++ gpon 5608T OLT
Technical Data
|
Powering Options |
DC: -38.4VDC to -72VDC; AC: 100V to 240V |
|
Dimensions (Height x Width x Depth) |
3.47in x 17.4in x 9.63in |
|
Operating Temperature |
-40º F to +149º F |
|
Storage Temperature |
-40º F to +158º F |
|
SFP |
Class C C+,C++ |
|
Cooling |
Two multispeed fans, providing left to right forced air flow |
|
Operating Humidity |
5% to 85%, non-condensing, Altitude: 197 ft (60 m) |
Specification
|
switching capacity (control board) / System Layer 2 packet forwarding rate |
MCUD/MCUD 1: 128 Gbit/s (active/standby mode), 256 Gbit/s (load-sharing mode) |
|
Switching/Forwarding delay |
The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
|
BER in full load |
BER of a port when the port transmits data in full load < 10 e-7 |
|
System reliability specifications |
System: redundant configuration. System availability for the typical configuration: > 99.999%. Mean time between failures (MTBF): about 45 years. (for reference). |
|
Operating environment |
Operating temperature: -40°C ~ +65°C, Operating humidity: 5% ~ 95% RH, Atmospheric pressure: 61 ~ 106 kPa, Altitude: ≤ 4000 m |
|
Max. number of ADSL2+ / VDSL2 / POTS ports |
128 |
|
Max. number of EFM SHDSL /ISDN BRA / ISDN PRA ports |
64 |
|
Max. number of TDM SHDSL / GPON ports |
32 |
|
Max. number of 10G GPON ports |
8 |
|
Max. number of P2P FE / GE ports |
96 |
Optional
GPON
• 16 ports per card or 8 ports per card
• Robust Compliance to G.984 Series standards with 2.5/1.2 Gbps downstream and 1.2Gbps line
speed performance
• Support for B+ or C+ optical modules (SFPs) with max 40km differential distance
• Up to 1:128 split ratio per GPON port
• Optical Power Monitoring, Real Time Rogue ONT detection/isolation
XG-PON1
• 4 ports per card
• Fully compatible with GPON - compliance G.987 Series standards with 10/2.5 Gbps line speed
performance
• Supports XFP optical modules
VDSL2+POTS Combo
• 48 VDSL2 and POTS integrated ports with up to 17a profile
• Two-pair bonding for maximum speed
• G.INP (G.998.4) support for re-transmission at the physical layer
• Built-in support for SELT, DELT, and MELT
• POTS line Loop-Start Operation
• Ringing Mode – Balanced ringing with -15VDC offset on "Ring"
• Multiple CODECs – G.711 (µ-Law and A-Law), G.729, G.723, G.726










