-
KCO-GLC-EX-SMD 1000BASE-EX SFP 1310nm 40km DOM Duplex LC SMF Fiber Optic Transceiver Module
- Up to 1.25Gb/s Data Links
- Hot-Pluggable
- 1310nm DFB laser transmitter
- Duplex LC connector
- Up to 40 km on 9/125μm SMF
- Single +3.3V Power Supply
- Low power dissipation <1W typically
- Commercial operating temperature range: 0°C to 70°C
- RoHS compliant
- Compliant with SFF-8472
-
1.25Gb/s 1310nm Single-mode SFP Transceiver
Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of four sections: the LD driver, the limiting amplifier, the FP laser and the PIN photo-detector. The module data link up to 20km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.
-
1.25Gb/s 850nm Multi-mode SFP Transceiver
The KCO-SFP-MM-1.25-550-01 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).
The transceiver consists of four sections: the LD driver, the limiting amplifier, the VCSEL laser and the PIN photo-detector. The module data link up to 550m in 50/125um multimode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.
-
KCO SFP GE T 1000M 1.25G RJ45 Copper Connector 100m Optical Transceiver Module
KCO SFP GE T 1000M 1.25G RJ45 Copper Connector 30m Optical Transceiver Module
is compatible for Cisco GLC-T / GLC-TE/SFP-GE-T, Mikrotik S-RJ01
The KCO SFP GE T is a Cisco SFP-GE-T compatible copper transceiver module that has been designed, programmed and tested to work with Cisco brand switches and routers. It delivers dependable 1GbE (1000 Mbps) connectivity over copper cable, for 1000BASE-T compliant networks, with a maximum distance of up to 100 m.
